G-XCEL™ Pants


Back to New Gear



G-XCEL Pants



Padded H-Back Rip-Cord Suspenders
Suspenders attach to horizontal loops sewn to the top of the waistband so that there is no metal hardware to dig in to your waist or get caught up. H-Back design stays on your shoulder; rip-cord hardware allows easy adjustment and quick release. Integral padded shoulder straps.


Lo-Rise Style
Rides lower than standard pants for a "street" fit. With the added length in the AXTION™ knee, seat, and liner, the pants don't ride down and with the longer cut in the back and sides of the jacket, you maintain generous overlap even with lower rise pants.


Front Closure
The standard hook and dee ring closure, take-up strap and deep, vertical hook and loop storm fly goes on easily and closes up quickly. Or choose our optional adjustable belt closure.


AXTION™ Liner (Patented)
The liner has darts in both the thermal and moisture barriers corresponding to the added length in the shell provided by the AXTION™ knee. The liner has a reverse boot cut in the back and a concave cut in the front to keep the liner from hanging below the shell and is connected at the cuff with 2 snap tabs for security.


AXTION™ Seat (Patented)
When you bend your knees, you also need added length in the seat to allow for less restriction and to keep the back of your pants from being pulled down so that the overlap with your jacket is not compromised. Try on a pair and you will immediately appreciate the difference.


AXTION™ Knee (Patented)
Horizontal pleats built into the shell and corresponding darts in the AXTION™ liner on the front of each leg provide extra length where you need it for stepping up, sitting down, kneeling, or crawling.


TRIMTRAX™ Thread Protection System (Patented)
Our patented system of abrasion resistant KEVLAR® cording protects the thread securing our reflective trim from abrasion. Lasts longer than conventional trim stitching so maintenance costs are lower and your gear is in service more often.


Independent Stretch Waistband
2" wide and lined with water resistant fabric, the waistband is cut on the bias (diagonally) for stretch and an unrestricted fit. Liner attaches under the waistband for no-gap protection.


Diamond Crotch Gusset
Distributes fabric stress over five double-stitched seams in both the shell and liner.


Expansion Cargo Pant Pockets
Two 2" X 10" X 10" full bellows style cargo pockets have an extra layer of KEVLAR® to reinforce the lower half for longer wear life.


Liner Access Opening
An access opening in the liner hidden under the front waistband allows you to check out the condition of the moisture barrier and thermal barrier when you need to.


Flame-Resistant Hook and Loop Fastener
Hook and loop fastener is specially treated for flame resistance and attached with quadruple stitching at all primary closures.


Optional Knee Reinforcement
Optional knee reinforcement and padding is available.


Reverse Boot Cut on Pant Legs
Pant legs are 1" shorter in the back to avoid premature cuff wear.


Cuff Reinforcement on Sleeve and Pant Leg
Cuffs are reinforced with an extra layer of your choice of materials, double-stitched for extended wear.


Women's Sizes
Available in a full range of patterns designed especially for the female firefighter.


Double-Stitched Seams
The strongest double-needle joining seams in the industry with more stitches per inch for longer service life.


LH Pants (Left Opening)
For use with GEMTOR™ or other left opening harnesses, LH Pants open on the left side. The standard hook and dee ring closure, take-up strap, and deep hook and loop storm fly goes on easily and closes up quickly. Or choose our optional adjustable belt closure. Optional external harness loops fits GEMTOR™ and most other external harnesses.


Optional SILIZONE™ Foam Knees
Knees can be padded with SILIZONE™ foam padding to make crawling almost heavenly. The SILIZONE™ padding is installed on the outer shell as standard, but can also be installed on the liner system if you prefer.